Payment & Shipping Terms:
|Excavator:||12~16 Ton||Max Open:||1570 Mm|
|Bucket Capacity:||0.52 Cum||Bucket Width:||830 Mm|
|Weight:||880 Kg||Hose Fittings:||BSP 3/4"|
0.52CUM excavator claw attachment,
Q690D excavator claw attachment,
Q345B excavator rotating bucket
CAT312 Excavator Bucket Grab BSP 3/4" Hose Fittings Easy Operation High Precision Assembled
Design for grabbing granular material and irregular shape such as Fertilizers, grain, coal, coke, ore, sand, granular materials and gravel and so on. Hydraulic grab can connect directly with hook under crane, easy and convenient, high grabbing efficiency and steady service performance. Very popular in wharf, steel mills, power plants, ships, garbage incineration plant and other Working Occasions. Hydraulic grab can work with all kinds of cranes.
Excavator bucket grab is a special excavator attachments,it have both the excavating and grabbing function.Can complete lots of works and do not need to replace the attachments.
The Excavator bucket grab is one cylinder design,and the cylinder is in the bucket,not like other thumb grab,cylinder base is on excavator stick.
Excavator tonnage (Ton)
Max Open (mm)
Self Weight (kg)
Above paramter is our standard design,if have special requirements,can communicate with us and customize for you.
-1. Welding is golden proportion protective-gas welding,the golden proportion is 80% Argon and 20% CO2 mixed.
-2. All our products is high precision assembled.Pins is zero to zero standard,and boss hole is only 0.15mm bigger than pins' diameter,very hard for assembly,but high precision,high precision means very durable and longer life.
-3. ucket side plate,finger side plate,have welding NM400 outside,very durable.
-4. Our grab bucket design is very wide design,so it's better for excavating work.
-5. Have internal gusset plates,very durable.
Factory and Delivery pictures:
1. Both the main-body and jaws are made from hardox450,structure is high performance
2. The 2pcs jaws is made from 80mm thick hardox450 steel,much more longer life than cast jaw.
3. We use boring machine adjust the precision after welding,to avoid the big tolerance leaded by welding
4. Blade is 2pcs 4-side blade,so have a much more longer life
5. The blade of this demolition shear,can cut 30mm-diameter steel rod,can cut 30mm-thick steel sheet.
6. Rotate motor is two stage planetary reducer hydraulic pump,much more higher rotate speed,better than worm gear pump.
Contact Person: Terry Wang